Dave's Heavy Duty Screw Clamp

This is the same kind of tool that we use in our gunsmith shop every day! And it's made in the USA.

There is a better way to help you remove stubborn, stuck screws. . .

Machined from solid 1018 steel bar stock with hardened 4140 steel bit holder. My heavy-duty screw clamp accepts standard Brownell's Magna-tip and other ¼" hex drive screwdriver bits. Adjustable so it may be used in many areas and on many firearms, this sturdy tool is designed to hold the screwdriver bit tightly, aligning it straight-down into the stubborn screw slot and the design forces ithe bit to stay in the screw slot. Once the clamp is firmly in place, the bit may be turned with a 1/4" automotive wrench.

We've incorporated features into this tool that are based on years of real-time gunsmith shop experience;

• clearance cuts in the lower jaw allow room for domed screw bottoms
• adjustable bit holder made from hardened 4140 steel
• the 1018 steel jaws are 1" wide and a full 3/8" thick
• adjustable, two-position width
• the tool is of heavy-duty construction, made from solid steel
• supplied in a handsome blue (black oxide) finish to deter rust
• furnished with leather lower jaw pad to help protect fine gun finishes
• 5" long clamping bolts & wing nuts are easily replacable, hardware store items
• the tool is further expandable by substituting longer clamping screws
• comes with detailed instructions and professional screw removal tips

• and. . .it's 100% AMERICAN MADE!

$95.99 plus $10. shpg inside the USA. E-mail me to order dave@oldwestgunsmith.com or you may Click here for an order blank to pay by check or money order.

To order tools

David R. Chicoine, P.O. Box 635, Gastonia, NC 28053