Smith & Wesson Hand Ejector parts

This page has parts for S&W .44 Hand Ejector revolvers from about 1908 to the 1970s built on the N frame.

For quick reference, there is a parts picture of the .44 Hand Ejector 2nd Model showing part numbers, along with a named parts list and an identification chart for N frames at the bottom of this page.

Need help referencing parts for other early Smith & Wesson Hand Ejector Models? Try to identify your gun from the picture page. There I have posted some old parts list illustrations for your information, then let me know what the part number or name is that you need.

If you don't see what you need, please keep checking back or ask me about it.

E-mail dave@oldwestgunsmith.com

Updated 5-24-11

To order by snail-mail: Printable order form

The parts below are shown by name, in alphabetical order. The letter pre-fix of the part number denotes the frame size.

 

N frame- large size, .44 (6 shot) .357 Magnum, 38-44, .45 military & 1917 ~includes later Models 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 & etc.~

Alphabetical quick links (1st letter of the part name)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Yes. . .we have pre-war sideplate screws!

B

Barrel, part #N-1, 38-44 postwar-Heavy Duty, 6½", new in the white, needs final finishing work and polish. Fully marked and rifled, with forged-fixed front. Out of stock

Barrel, part #N-1, 38-44 postwar-Outdoorsman (Model 23) 6½", new in the white, needs final finishing and polish. Fully marked and rifled, with ramp and patridge front site. $110.00 only a few left, shown below

Bolt, part #N-25, 4th model .44 HE and early 1950's N frame, excellent $30.

Butt swivel (Lanyard Ring), part#N54, N frames including the 1917, original, used VG or better, shown below, $45.

C

Center Pin, part #N-10, standard N frame, excellent $16.00

Center pin spring, part #N-11, standard N frame fits 2nd HE up to 1970's as new $2.00

Cylinder Stop, part #N-44, fits all K and N frame made after 1905 up until 1962, original used Exc. $35.

Cylinder Stop, part #N-44, fits as above, original, oversize, used as new $45. (check availability)

Cylinder stop plunger, part# N-45, K-N frames pre-war, original, each $4.

Cylinder stop spring, part# N-46, K-N frames pre-war, original, each $3.

Cylinder stop screw, part# N-47, K-N frames pre-war, blue only, original, new, each $8.

E

Extractor, part #N-6 fits 38-44, 1950's, as new, blue $85.00

Extractor rod, photo below part #N-8, S&W 1917 or 2nd Model Hand Ejector .44. New-Please inquire

Extractor rod, photo below part #N-8, S&W 3rd Model Hand Ejector .44, .357 Magnum, 38-44 pre-1948 vintage. Out of stock

Extractor spring, part #N-7, fits all, original S&W $4.25

Extractor collar, part #N-9, fits 2nd & 3rd HE N frames, original $5.00

F

G

Grip medalions, (shown below)1930s solid type, silver, new ~ but flawed! each pair is different-overstruck or double-stamped, never installed. Per pair $25. below

Grips: 1917 military, original S&W and brand, new-never serial numbered or fitted to a gun and nicely figured. $200.

H

Hammer, part #626 below , for the .44 Hand Ejector First Model (Triplelock), this is the early type with chafing bushings. This scarce, hammer has about 99% case colors with some light scuffing damage, perfect area and perfect checkering. Never been in a gun! Comes with factory new sear and stirrup, no F/P. $350.

Hammer, part #N31 not shown, for the .44 Hand Ejector Second Model (also fits 1917). Stripped hammer with firing pin has about 75% case colors with some light rust damage, excellent sear area and very good checkering. out of stock

Hammer, part #N31 not shown, for the .44 Hand Ejector Third-grooved Registered Magnum HUMPBACK. Stripped hammer with firing pin has about 75% muted case colors and the spur area has been crudely altered, sear area looks altered also. If un-altered this would be a $400 hammer! $100.

Hammer, part #N31 not shown, for the .44 Hand Ejector Fourth (AKA: 1946 model) Stripped hammer with firing pin is as-new. This will work as a functional replacement for the 2nd and 3rd model 44/45 HEs. $75.00

Hammer, N frame .500" target hammer from the 1970's, with firing pin. Appears brand new(below)-never installed in a gun. $59.95

Hammer, N frame .500" target hammer from the 1970's, complete. Appears nearly new, lightly used. $45.00

Hammer, N frame .375" standard hammer from the 1970's, with firing pin. Appears nearly new, lightly used. $35.00

Hammer nose, part #N-32, new, pre-war N frame $25.00

Hammer nose rivet, part #N-33, new K-N frame $4.00

Hand, part #N-40 (not shown) Out of stock

Hand lever, part #N-38, all N frame pre-1950 as new $4.50

Hand pin (not illustrated or numbered), all early K-N frame hands-the smaller of the two pins in the trigger. New $2.

Hand lever spring, part #N-39, new $3.

L

Locking bolt, part #N-3, fits all .44 HE 2nd model & 1917. Exc-new condition., original S&W mfg, each $5.25

Locking bolt spring, part #N-4, fits all, new, original S&W, each $2.

M

Mainspring, part #N-48, fits all .38, .44 & .45 or 1917 Hand Ejector models, N frame, pre-WW2 original Smith & Wesson mfg., Brand new~old stock, @ $14.95 each

or in used excellent condition @ $10.95 each

Pin: (not illustrated or numbered) fits stirrup, sear or trigger lever, original new, each $2.00

Pin: (not illustrated or numbered) fits hand lever, any K or N pre-WW2. each $2.00

R

Rebound slide, part #N-42, N frame 2nd-3rd .44 HE, up to 1944, as new $15.00

Rebound slide, part #N-42, N frame late 3rd .44 HE, 1946 - up to modern, as new $15.00

Rebound slide spring, #K43, pre-war K or N frame, standard, original new, each $6.00

Rear sight assy, target adjustable, early 1950's pre-Model 27, exc. $75.00

S

Sear, part #N35, fits all 2nd and 3rd HE, thru 1945 Exc. $20.00

Sear Spring, part #N-36, fits pre-WW2; N frames, original new, each $2.00

Sideplate screws

Sideplate screw, part #N-24, domed small head. Pre-WW2, blue or nkl, exc or better original each $12.00

Sideplate screw, part #N-23, domed large head. n frames, pre-WW2, nkl or blue, exc or better original each $15.00

Stirrup, part #N-34, fits all "N" frame models, pre-WW 2 S&W, exc. $18.00

T

Thumbpiece, part #N-29, standard K-N frame pre-war, blue excellent $40.00

Thumbpiece nut, part #N-30, standard K-N frame, excellent $12.00

Trigger, part #N-37, 1940s' serrated face, .44 2nd & 3rd HE, VG-excellent original $29.95

Trigger, as above, brand new original parts, circa 1940s, new/old stock never used $40.00

Trigger, as above, patent marked, circa 1930s, probably re-cased, great colors, this trigger is correct in 3rd .44 H.E. and Registered Magnums $65.00

Y

Yoke Stop, part # K-12a, K-N, new $8.00

Yoke stop spring, parts # K-12b, K-N, new $3.00

If you need help referencing parts for other early Smith & Wesson Hand Ejector Models, try and identify your gun from the picture page where I have posted some old parts list illustrations for your information, then let me know what the part number is that you need.

Below on this page is also an identification chart for N-frame revolvers.

Below: The New Century or Triplelock, .44 Hand Ejector first Model (N frame) commercial s/n 1-15,375. The parts numbers shown in this illustration are unique to the .44 H.E. 1st Model.

(addition revolvers built for military-serialed separately)

Below: .44 Hand Ejector 2nd Model (3rd is the same except the barrel uses a large underlug and later 3rd models use a hammer block safety) (N frame) s/n 15,376-about 50,000