Updated 1-12-11
|
To order parts: use the e-mail link to contact me. Payments: I accept Visa or Mastercard or you may send me a check or money order as payment, in either case; use the e-mail link to contact me. Shipping charge for small parts orders is an additional $4.95 US per order inside the USA only for USPS Priority Mail. Please note: $25.00 merchandise minimum on credit card orders. To order by snail-mail: Printable order form |
The illustration below is from an early 1900s S&W parts catalog and shows a 3rd model with some 2nd model parts included. . .
The illustration below is from Antique Firearms Assembly/Disassembly ©2005 by David R. Chicoine and shows a 1st Model .38 SA, aka Baby Russian. . .
| Model | Serial No. range | Dates Made |
1st |
1-25,548 |
1876-1877 |
2nd |
1-108,255 |
1877-1891 |
3rd |
1-28,107 |
1891-1911 |
Please specify 1st, 2nd or 3rd Model
fr=fair, gd=good, vg=very good, exc=excellent, a/s=as new, nkl=nickel, bl=blue, cc=case colors
| Part# | Part | Description-cond | Price each, USD |
| 110 | Barrel | inquire | |
| 111 | Frame | inquire | |
| 112 | Cylinder | inquire | |
| 113 | Base pin | inquire | |
| 114 | Gas ring | inquire | |
| 115 | Sideplate | 2nd issue, nickel, good | $35. |
| 116 | Trigger guard, 3rd Model-Mexican | inquire | |
| 117 | Trigger guard, 3rd Model | inquire | |
| 118 | Stock, right | inquire | |
| 119 | Stock, left | inquire | |
| 120 | Hammer | inquire | |
| 121 | Extractor | inquire | |
| 122 | Extractor rod, 2nd or 3rd | inquire | $8. |
| 122a | Extractor rack 1st model | used vg | $65. |
| 122b | extractor spring, 1st model | inquire | $10. |
| 122f | extractor catch, 1st model | used exc. | $25. |
| 122g | ext catch spring, 1st model | inquire | $3. |
| 123 | Trigger, 3rd mdl | inquire | |
| 124 | Trigger, 1st-2nd | used vg or better |
$35. |
| 125 | Extractor cam | late | $20. |
| 125 | Extractor cam | early 2nd model, pivoting pawl | |
| 126 | Barrel catch | inquire | |
| 127 | Stirrup, 3rd mdl | inquire | |
| 128 | Stirrup, 1st-2nd or Mexican | exc. | $15. |
| 129 | Cylinder stop | used VG or better | $25. |
| 130 | Trigger spring, 3rd | inquire | |
| 131 | Trigger spring, 1st-2nd | inquire | |
| 132 | Stop spring, 3rd | inquire | |
| 133 | stop spring, 1st-2nd | inquire | $12. |
| 134 | Mainspring 1st-2nd | used VG or better | $30. |
| 135 | Handspring | inquire | |
| 136 | Bbl catch cam spring | inquire | $3. |
| 137 | Extractor spring, 2nd-3rd | inquire | |
| 138 | Strain screw, 3rd | inquire | |
| 139 | Bbl catch screw | inquire | |
| 140 | Extractor stud | inquire | |
| 141 | Hammer stud | 1st or 2nd model, vg-exc | $25. |
| 142 | Hammer stud nut | inquire | |
| 143 | Joint Pivot | vg or better | $15. |
| 143a | Joint pivot screw | American made reproduction, new in the white | $20. |
| 144 | Stock screw | inquire | |
| 145 | plate screw, long | inquire | |
| 146 | plate screw, short | American made reproduction, new in the white | $18. |
| 147 | stop plate screw | inquire | |
| 148 | Strain screw, 1st-2nd | inquire | |
| 149 | Guard screw-3rd | inquire | |
| 150 | Stop plate | inquire | |
| 151 | Hand | inquire | |
| 152 | Bbl catch cam | inquire | $10. |
| 154 | Sight, front |  New, unused but may have some storage dings and/or light rusting |
$15. |
| 125c | extractor gear bushing, 1st | exc | $15. |
| 122b | extractor spring, 1st mdl | exc | $5. |
| 122c | center pin, 1st | exc | $10. |
| 125g | extractor pawl, 1st | exc | $20. |
| 125h | extractor pawl spring, 1st | exc | $3. |
| 154T | Front sight, target | inquire | |
| 112A | Cylinder catch | 1st model | |
| 112B | Cyl.catch screw | 1st model | |
Unless otherwise specified, all parts shown are original S&W manufacture, these are used parts, dating back more than 100 years so other than the described condition, there is no warranty, no gaurantee against breakage or any other flaw nor that the part will be useable in your revolver.
