Smith & Wesson 32 Hand Ejector parts
This page has parts for S&W Hand Ejector revolvers from about 1896 to the 1970s including I (pronounced eye) and early J frames.
For quick reference, there is a parts picture of the .32 Hand Ejector Third Model showing part numbers, along with a named parts list and an identification chart for I frames at the bottom of this page.
Need help referencing parts for other early Smith & Wesson Hand Ejector Models? Try to identify your gun from the picture page. There I have posted some old parts list illustrations for your information, then let me know what the part number or name is that you need.
If you don't see what you need, please keep checking back or ask me about it.
E-mail dave@oldwestgunsmith.com
Updated 5-20-11
|
To order by snail-mail: Printable order form
The parts below are shown by name, in alphabetical order. Parts for older .22, .32, .38 ( I and J) frame size Hand Ejectors are grouped together. The letter pre-fix of the part number denotes the frame size.
Alphabetical quick links (1st letter of the part name)
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Yes. . .we have pre-war sideplate screws!
Barrel, part #i1, I frame .38 S&W, 4¼" from 38 Reg. Police, about 50% blue, fair-good bore w-pits $35.00
Barrel, part #i1, I frame, 6" .22 caliber, 22/32 Hand Ejector target, a new barrel with rifling & threads, no markings $50.00
Barrel, (below) part #J1, J frame Chief Spl, 2" nickel (1960s) exc. $45.00
Barrel, part #J1, J frame Chief Spl, 2" nickel (1960s) vg-plating is dull but great bore $25.00
Barrel, (below) part #J1, J frame Chief Spl, 2" blue (1960s) vg, 60% splotchy blue exc. bore $35.00
Bolt, part #i25 1903-3rd change through 32 HE 3rd Model, exc. $25.00
Bolt, part #J-25e, early 1950's J flat latch type, excellent $20.00
Bolt, part #J-25, later 1970's J; uses conventional thumbpiece, excellent $12.00
Center Pin, part #i-10, standard i frame 32 HE, fits 1903-2nd change up to 1970's, over 2" bbl. exc $15.00
Center Pin, part #i10, fits .38 Terrier/Reg. Police over 2" barrel. Exc. $25.00
Center Pin, part #J-10, standard J frame for 2" barrel, excellent $12.00
Center pin spring, part #J-11, standard J frame as new $2.00
Center pin spring, part #i-11, standard i frame, exc $3.00
Cylinder, part #I-5 .38 S&W early 1930's, 60% blue, VG chambers $75.
Cylinder, part #I-5 .32 S&W long, 1920's, 60% blue, VG chambers $65.
Cylinder, part #I-5 .22 long rifle, (22/32 HE), 10% blue, fair chambers $25.
Cylinder Stop, part #I-44, fits all I (i) frame from 1903-2nd change up until 1962, original used Exc. $35.
Cylinder Stop, part #J-44, fits J frame made after 1953, uses the early wire type spring, original used Exc. $25.
Cylinder Stop, part #J-44, fits J frame made after about 1957, uses late coil type spring, original used Exc. $15.
Cylinder stop plunger, part#i-45, i frames pre-war, original, each $4.
Cylinder stop screw, i frames pre-war, nickel or blue, original exc, each $8.
Cylinder stop spring, coil part# J-46, J frames after 1958, original, each $3.
Cylinder stop spring, wire, part# J-46, J frames -early, up to 1953-, original, each $5.
Extractor, part #i6 .32 S&W Long, 1903-5th change, 32 HE 3rd Model. Exc. $45.00
Extractor, part #i6, 38 S&W Reg. Police, out
Extractor, part #J-6 fits Model 30-31 .32 S&W Long, 1960s-70s near-new, $30.
Extractor collar, part #i-9 fits 1903-5th, through 32 HE-3rd model., excellent $3.
Extractor collar, part #J-9 fits J frame .22&32 cal, as new $3.
Extractor rod, part # i-8, fits 32 HE 1903-1903 2nd change, uses removable knob, vg. $30.00
Extractor rod, part # i-8, fits 32 HE 1903 3rd change-early 32 HE 3rd Model, large knob, vg. $35.00
Extractor rod, part # J-8, 2" fits .22 and .32 caliber, 1960s, blue, exc. $10.00
Extractor spring, part #I-7, fits all 1903 based 32 HE, VG-exc original $5.00
Extractor spring, part #J-7, fits M36-37 .38 cal., new original $3.00
Extractor spring, part #J-7a, fits M30, 31, 34, 35 .22 & 32 cal., new original $3.00
Frame, part #i-13, .32 HE-3rd Model 297,xxx serial range. This is a stripped frame that retains about 60-70% original blue, exc. markings. An FFL or C&R is required. $50.00
Grips, .32 Hand Ejector, black hard rubber. . .out
Hammer, (not shown) part#i31, 1903-5th change .32 Hand Ejector, used VG stripped, the only flaw is someone has ground part of the rebound flat off, thus it is priced accordingly $25.
Hammer, part#i31 (not shown, 32 Hand Ejector-3rd Model , used vg-excellent with hammer nose $60.00
Hammer, part#i31 (not shown, 32 Hand Ejector-1903-2nd Change, excellent w-hammer nose SOLD
Hammer, part#i31 (not shown, 32 Hand Ejector-4th Model (1946 Model), used excellent w/o hammer nose $35.00 or new-unused $65.00
Hammer, (not shown) part#J31, 1960s-70s dash "1s" and later M30, 31, 36 etc., for the late strut, exc complete hammer $35.00
Hammer, (not shown) part#J31, pre-1962 (late 1950s) M30, 31, 36 etc., for the early ball-strut, exc w-firing pin SOLD
Hand, part #I-38, fits 1903 .32 H.E. 2nd change through 1903-5th change, w/o hammer block safety, exc. $25.00
Hand, part #I-38, fits 32 H.E. Third Model, with hammer block safety, (this type has a plunger&spring in the sideplate) exc. $40.00
Hand, part #J38, fits M32-34-35-36-37, as new $18.00
Hand lever, part #I-36 $7.00
Hand lever spring, part #I-37 $3.00
Locking bolt, part #i-3, fits all 1903-up .32 HE, exc-new condition., original Smith & Wesson mfg, each $5.25
Locking bolt spring, part #i-4, fits all 1903-up .32 HE, new, original S&W, each $2.00
Mainspring, part#J-46, early 1950s J $5.00
Mainspring Strut, early 1950s ball type J, scarce! $25.
Pin: (not illustrated or numbered) fits stirrup, sear or trigger lever, original new, each $2.00
Rebound slide, #J-42 J frame, 1950-1970s, used excellent $12.00
Rebound slide, part #i-42, i frame pre-war 1903-5th change through 32 HE 3rd Model to1942, Exc. $18.00
Rebound slide spring, #i43, I frame, standard, pre-war original, vg, each $5.00
Rebound slide spring, #J43, J frame, standard, original new, each $4.00
Sear, part #i35, fits .32 Hand Ejector 1903-4th&5th change & 32 HE 3rd Exc. $20.00
Sear, part #i35, fits .32 Hand Ejector 1903-2nd and 3rd change out of stock
Sear, part #J-35, fits J frame 1950s-1970s, as new $8.50
sear spring 32 Hand Ejector all 1903 based $3.00
Sideplate, part #i-22, .32 HE 1903 2nd thru-5th change, pre-hammer block, nickel, exc. $40.00
Sideplate, part #i-22, .32 HE 1903, 32 HE 3rd Model, w-1st type hammer block, complete, VG $50.00
Sideplate, part #i22a, late 1940s pre-model 30 & terrier, nickel, exc. $45.00
Sideplate, part #J-22, J frame, nickel or blue, 1960s exc. $35.00
Sideplate, part #J-22, 4 screw J frame M36, nickel or blue, 1950s exc. $40.00
Sideplate screw, part #i-23, domed large head. Fits i frames, pre-WW2, blue, exc or better original screws each (only a few left) $12.00
Sideplate screw, part #i-24, domed small head, short (sometimes called the Yoke screw, for the front plate hole). Fits i frames, pre-WW2, blue, exc or better original screws each $10.00 (only a few left)
Sideplate screw, part #i-24, domed small head, regular (for the center & rear plate hole). Fits i frames, pre-WW2, blue, exc or better original screws each $10.00
Sideplate screw, part #J-24, domed small head. Fits J, front screw, 1950s blue, as new each $5.00
Sideplate screw, part #J-24a, flat head. Fits J, rear screw, 1950s blue, as new each $5.00
Stirrup, part #i-34, fits all "I" frame models, original pre-WW2 S&W, exc., each $10.00
Thumbpiece, part #I-29 .32 Hand Ejector 1903 and up, pre-war, exc., original nickel or blue $35.00
Thumbpiece, part #J-29 flat latch J, early 1950s, late type blued, excellent $25.00
Thumbpiece, part #J-29 flat latch J, early 1950s, nickel, late type, excellent $25.
Thumbpiece nut, part #I-30 .32 Hand Ejector 1903 and up, pre-war, exc. original nickel or blue $10.00
Thumbpiece screw, for flat-latch, blue only VG $5.00
Trigger, part #I-37 .32 Hand Ejector, 1903-3rd change, exc. $40.00
Trigger, part #I-37 .32 Hand Ejector - 3rd Model (late 1920's for the 1st type hammer block~1 hand pin hole) exc. $40.00
Trigger, part #J-37, 1950s' J frame serrated face, used excellent original $35.00
Yoke, part #I-12, I frame pre-ww2, 1903-2nd to 32 HE 3rd, used VG-, excellent @ $45.00 each
Yoke, part #I-12, I frame pre-Models 30, 31, 34, 35 late 1940s. used 90% nickel, excellent @ $40.00 each
Yoke, part #J-12, Models 36, 37, most of these are 1950s. used about 85-90% blue, excellent @ $35.00 each
Yoke, part #J-12, Models 30, 31, 34, 35 (.22 & 32 cal) 1960s. used about 85-90% blue, excellent @ $35.00 each
If you need help referencing parts for other early Smith & Wesson Hand Ejector Models, try and identify your gun from the picture page where I have posted some old parts list illustrations for your information, then let me know what the part number is that you need.
Below on this page is also an identification chart for i-frame revolvers.
| To order parts:
use the e-mail link to contact me. Payments:
I accept Visa or Mastercard or you may send me a check or
money order as payment, in either case; use the e-mail
link to contact me. Shipping charge is an additional $5.20
US per order inside the USA only for USPS Priority Mail
for small orders, $10. large orders. A 10% return fee is charged on
any returned order that was paid with a credit card.
Please note we have a $25.00 merchandise minimum on credit card orders. To order by snail-mail: Printable order form Can't find what you want? Maybe I can help. . .drop me an e-mail and let me know your needs. I have maintained a "Parts Finder Service" for old S&W parts since 1976 and we have had very good luck finding rare old parts for hundreds of folks. e-mail |
The illustration below is of the S&W 32 HE 3rd Model revolver from a 1920s vintage S&W parts catalog.
The parts list below is of the S&W 32 HE 3rd Model
Revolvers in the .32 Hand Ejector i (pronounced eye) frame series. . .
1896 .32 Hand Ejector, First Model (Model "i" or i frame) s/n 1-19,712
Model 1903 .32 Hand Ejector (i frame). s/n 1-19,425
32 Hand Ejector Model 1903-1st Change. (i frame). s/n 19,426-51,126
32 Hand Ejector Model 1903-2nd Change. (i frame). s/n 51,127-95,500
32 Hand Ejector Model 1903-3rd Change. (i frame). s/n 95,501-96,125
32 Hand Ejector Model 1903-4th Change. (i frame). s/n 96,126-102,500
32 Hand Ejector Model 1903-5th Change. (i frame). s/n 102,501-263,000
32 Hand Ejector Model Third Model. (i frame). s/n 263,001-534,532
